Designs From Maison Worth

charles-frederick-worth-english-fashion-designer-active-in-paris

The Master Himself

Today we take you across the ocean to Paris, the capital of fashion in the late 19th Century for a brief look at one (of many) creation by Frederick Charles Worth. Worth was one of the first “name” fashion designers who pioneered what ultimately was to become the Haute Couture system that ruled the fashion world for almost a century.

Along with creating his own dress designs, Worth also commissioned his own custom fabrics and in particular he patronized the French silk industry centered in Lyon1Unfortunately, the silk industry in Lyon has diminished since the late 19th Century and today, Prelle et Cie is one of the few silk weavers that remain. Prelle’s silks have been used to restore a wide variety of historic sites worldwide and they even recreated many of the silk fabrics used in 2006 film Marie Antoinette.. One such creation that Worth commissioned from the firm of Morel, Poeckès & Paumlin in 1889 was the Tulipes Hollandaises (“Holland Tulips). The design was intended to push the silk weaver’s art to its limits, the design has a three-foot repeat in the pattern which made it difficult to weave.

Below are two pictures of the textile’s design:

Worth Evening Cape 1889_3

Worth Evening Cape 1889_4

The tulips are depicted in bright colors set against a black background and some commentators have characterized it as an “aggressive” design intended to make a bold statement, especially given the size of the design repeat.

As part of the 1889 Exposition Universelle in Paris, the products of French industry were exhibited and naturally the textile and couture industries were part of it. The above textile was put on display and it ultimately was awarded a grand prize.

Paris_1889_plakatThe above fabric was ultimately made into an evening cape that was designed to show off the tulip design to its maximum advantage:

Worth_Evening Cape 1889_1

Front View- Evening Cape, House of Worth, 1889; Metropolitan Museum of Art (2009.300.1708)

Worth_Evening Cape 1889_2

Rear View- Evening Cape, House of Worth, 1889; Metropolitan Museum of Art (2009.300.1708)

Worth_Evening Cape 1889_5

Here’s a view that’s a bit less sterile than what is normally encountered in a museum setting.

The above evening cape shows off the silk textile to its maximum advantage. Some could argue that it’s excessive and perhaps even gauche but that was the nature of Haute Couture in the late 19th Century and given the spirit of the time, anything less would have been dismissed as banal. Less was definitely not more during the Belle Epoch. 🙂



At The Atelier: Design Creation- Part 6

In out last post, we assembled the pieces for both the exterior fashion layer and the interior lining/facing layers for the Eton jacket.

In full disclosure, we’d like to say that this project has been an interesting learning experience in that it’s demonstrated to us that there is a lot more involved to drafting a pattern than simply drawing lines on paper following some formula, cutting out the pieces, and putting it together. A lot more. The one thing that nobody really ever discussed in pattern drafting and overall development is that once a pattern is constructed and tested out with one or more toilles, there’s still the matter of working out just how exactly the garment is going to be constructed. Of course, it’s assumed that one just knows all the relevant techniques and that bears little or nor discussion but the reality is with historical garments, there’s a lot that’s become obscure or even lost over the years. Fortunately, there are a number of references out there so it’s not an impossible task but it’s one that’s going require a lot of practice and work to master. So with that said, let’s proceed to the next steps…🙂


We now arrive at one of the most crucial stages- assembling the jacket body.

A lot more pressing is in order but overall we’re pleased with how it came together.

And now onto constructing the cuffs:

The decision to utilize turn-back cuffs was purely an aesthetic one and we could have just as easily used a number of different styles… 🙂 Here’s  the  cuffs pinned to the sleeves:

 

And voila, sleeves!

And finally, the sleeves are attached and set in the proper position. All that remains is some final touch-ups.

(To be continued…)

 

And Now For A Little Marabou Trim

I‘m finally getting around to adding the final trim to this 1890s capelet I started last Fall. It’s marabou feather trim and it’s a time-consuming process of hand-stitching it on. My fingers will never be the same… 😉



Outerwear Style c. 1870

Today we feature an interesting circa 1870 visite from the Musée des Arts Décoratifs:

Visite, c. 1870; Musee de Arts Decoratifs (Inv. 49228), © MAD, Paris / photo : Jean Tholance

This visite is constructed from a combination of a silk jacquard in green, red, black, and gold and a what appears to be a black silk velvet with a raised floral design- it’s very hard to make out from the pictures. The multi-color jacquard runs along the front and it used in the sleeves and lower back; again, it’s difficult to make out the precise construction. Finally, the edges are trimmed with gold knot-work fringe. In many respects, this style is very reminiscent of 1860s mantles.

Below is a close-up of the sleeve:

In the above picture, one can see the elaborate silk jacquard pattern that’s very reminiscent of a tapestry and edged with knot-work fringe. Overall, the combination of a multicolor jacquard combined with black creates a very dramatic style effect and especially when it comes to the front and sleeves. It’s too bad that there are no pictures detailing the construction and especially on the back where the jacquard and the black velvet meet. This is an excellent example of early 1870s outerwear style and definitely would be a good candidate for recreating.



At The Atelier: Design Creation- Part 5

In out last post, we completed construction on the canvases for the two front pieces of the Eton jacket and now it’s time to move on to completing the rest of it. As noted previously, this jacket pattern is one that we drafted utilizing a pattern drafting system developed by Charles Hecklinger in The Keystone Jacket and Dress Cutter.  So let’s move on…🙂


Turning to the sleeves, we note that these sleeves have near-90 degree elbow bends and curves which present some challenges for sewing. We found the most practical method to be to first sew and finish the inside seams first. Next, the outer seams are sewn up. We must emphasize that these require a high degree of clipping along the seam allowances and ironing in order to maintain smooth lines and preserve the shape. It’s a definitely more complicated than conventional straight sleeves.

And now, time to put together the lining:

We  decided  to use a moiré for the lining…

Above is the assembled back and side pieces…then the two fronts which combine the lining and facing fabrics:

And finally, assembling the outer layer:

And here’s the lining all assembled:

And finally the outer body:

We’re happy to say that all the pattern pieces fit together very nicely and only a minimum of adjustments were needed. It’s hanging very nicely on the mannequin and we look forward to finally putting the main body together. 🙂

(To be continued…)