One of the many projects were working on is is starting work on a new early 1900s day suit design. We’re trying to base this off of original patterns and for skirt, we’ve settled on a pattern that was first published in 1905 by The Ladies Home Journal.
The original pattern was printed on tissue paper that’s now a hundred years old and needless to say, it’s not suitable for direct use for patterning so the first step is going to be tracing the pattern pieces onto regular pattern paper and then eventually creating more permanent pattern blocks. Fortunately, the pattern pieces had already been cut out (most likely back around 1905) but it took some careful unfolding and smoothing out before the tracing could begin. Also, given the age of the pattern, we dare not iron the pieces in order to flatten them out, which is the usual procedure.
In working with period patterns, one is struck by just how minimal the instructions and markings on the pattern itself are, especially compared against what’s today’s industry standard. We were able to figure out what the markings on the pattern pieces meant and when checked against the cursory instruction sheet, made complete sense. It’s a ten-gore skirt and it’s a fairly simple pattern, similar to standard skirt pattern blocks that are used today.
After tracing out the pattern pieces, we lined them up on proper order and made sure that the seams matched up properly and that the waistband and hem line up. We had to do a little truing up on the pattern paper but it was not a real issue. Finally, we noticed that one pattern piece for the belt was missing but this should be easy to remedy.
The next stage will be to cut out a muslin or toile and check it for fit and accuracy and make any necessary corrections to the pattern pieces. One final note, this is pattern that’s definitely designed for a slender person with a waist of 24 inches (corseted, no doubt). What’s also interesting is that the seam allowance is 3/8 inches- we’ll probably add an additional 1/4 inch to bring it to a standard home sewer seam allowance of 5/8 inches (that will give some more leeway for adjustments). Eventually, we’ll probably have to grade this pattern up to several larger sizes. As more progress is made, we’ll be posting updated on the start of what should prove to be an interesting project for 2018.